PROFILINE Headlamp Preparation Set

SKU: 20033136
GTIN: 4064700023765
Category: Polish
Manufacturers: Sonax

PROFILINE Headlight Conditioner Set

1x SONAX PROFILINE HeadlightPolish 250ml
1x SONAX PROFILINE HeadlightCoating 50ml
1x SONAX LambswoolPad/Lambswool Pad
15x SONAX Polishing Cloths
1x SONAX P-Ball
2x Abrasive Pad
1x SONAX Microfibre Cloth ultrafine/Microfibe Cloth ultrafine

57,12 €

incl. 19% VAT ,

Choose tax zone / country of delivery

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Description
Sicherheitshinweise

PROFILINE headlight preparation set

This set contains everything you need for the complete preparation of headlamp surfaces.
It removes yellowing, scratches and other surface damage from headlights.
The polish included then restores a perfect, smooth and transparent surface.
To preserve this result, the headlight surfaces are then sealed and protected with SONAX PROFILINE Headlight Coating.

(For approx. 20 applications with polishing machine).

Materials needed: SONAX PROFILINE Headlight Conditioning Set, window cleaner, adhesive tape, microfibre cloth, water.

First open the bonnet and tape off the adjacent body parts to prevent damage during sanding.
Now clean the surface thoroughly with the windscreen cleaner and dry it.
In the next step, wet sand the headlight surface with the enclosed 1,000 grit sandpaper and the Puk until a homogeneous surface has formed. In this first step of the preparation it is normal that the headlights become dull and cloudy.
Now continue sanding the headlights with the 2,000 grit sandpaper, also wet, until a finer surface is created. Normally, when the headlights are wet, they are now transparent. Dry headlights are still blind, we change this in the next step.
Now the lambskin pad is either pulled onto a polishing machine or the enclosed puk.
Now shake the bottle of SONAX PROFILINE Headlight Polish thoroughly before use. Then put a few drops (less is more) on the lambskin pad. Spread the polish on the headlight and polish completely with medium pressure. Repeat the process until the headlights are completely transparent.
Now clean the headlights again with the window cleaner and dry completely.
Now take a sachet of SONAX PROFILINE Headlight Coating and put a few drops on the enclosed fleece cloth.
Now spread the coating completely in a crosswise motion on the headlight surface.
Then carefully remove the residue with the microfibre cloth provided.
Now the adhesive tape can be removed and the adjacent parts can be cleaned.
The coating must now cure for four hours, during which time the headlights must not come into contact with water.
Please do not wash / drive the vehicle into the car wash until after 7 days.

Special product instructions:

Highly alkaline pre-cleaners, e.g. at car washes, can attack the protective coating.
Therefore, regularly observe the beading behaviour on the headlamp, as this provides information about the functionality of the protective film.
Re-seal if necessary.

Product safety information

Manufacturer information:

SONAX GmbH
Münchener Straße 75
Bayern
Neuburg an der Donau, Deutschland, 86633
info@sonax.de

gefahren_sicherheitshinweisen:	P101 P102 P210 P271 P280 P310 P302 + P352 P305 + P351 + P338 P332 + P313 P501
gefahren_piktogramme:	GHS02 Flame GHS05 Corrosion
gefahren_gefahrenhinweise:	H226 H315 H318 H413
Shipping weight:	0,85 kg
Item weight:	0,82 kg